Air Conditioning Electric Hose Crimping Tool. Thank you for purchasing and using the BS-71500/EZ-71500 rechargeable electrohydraulic crimping tool. This product uses high-performance lithium battery power supply, motor drive, microcomputer (MCU) control, ultra-high pressure hydraulic system, and other electromechanical integration technologies. It combines ergonomic design into one, with beautiful appearance, simple operation, large output force, super safety, and high efficiency. It is one of the best tools for your water and electricity work.
Maximum output force: 35 KN. Crimping range: 3/8-7/8 (3 to 7 minutes). Hydraulic oil: 15 # low pour point anti wear hydraulic oil, about 160ml. Battery: DC 18V 4Ah lithium battery. Crimping cycle: 6-12 seconds/time (depending on pipe joint size).
Crimping times per saturated battery: about 140 times (DN25). Charging power supply: AC 100V240V 5060Hz. Charging time: about 2 hours. Microcomputer control system - Automatic pressure monitoring and dual safety protection during the crimping process, automatic reset and stop motor rotation after completing the crimping. Micro bipolar hydraulic system - During low pressure crimping, the piston (lower mold seat) is rapidly advanced.After the mold contacts the terminal, the piston slowly advances. 5.330 ° free rotation tong head - suitable for applications with multiple angles. When the power is turned on, the battery power is low, and an error occurs during the crimping process, the microcomputer control system will emit a sound and a red LED flashing signal (see Table 1). The overall structure of the tool is compact and ergonomically designed. The anti-skid rubber for the handheld part and the optimized center of gravity design make operation easier. High performance lithium-ion battery - Provides a stronger power source, without discharge memory effect. The ultra-low power consumption standby design can guarantee a storage time of up to 6 months, and is equipped with over discharge protection to extend the service life of the battery.
Temperature sensor - The tool will generate heat when working continuously for a long time. When the temperature exceeds 60?The tool will automatically stop and give a fault prompt to protect the tool from being burned down. Only when the temperature drops can the tool continue to work.
The battery can be charged and discharged hundreds of times, but eventually it will fail. When the number of times the tool is used significantly shortens, replace the battery. Please charge the battery in a timely manner, and do not completely consume the battery, as this may cause permanent failure of the lithium battery. When the tool is left unused for a long time, self discharge may occur inside the battery. The battery should be removed and kept fully charged every quarter.Do not connect the two poles of the battery with wires, as this can easily cause electric sparks. Do not use a damaged battery or charge it, otherwise it will increase the risk of electric shock.
Under no circumstances is it allowed to incinerate the battery, otherwise it may cause an explosion. When charging the battery, do not cover the charger with any object, as this can easily lead to a fire when the charger cannot dissipate heat. Please disconnect the power supply when not using the charger, which will reduce the risk of injury to children and untrained personnel.Do not use the charger in a humid environment or expose it to rain or snow, as this may increase the risk of electric shock. Do not disassemble the battery and charger without authorization. Is resolved before continuing to use.