Then press the handle to pull out the tabs directly. Use Bridge Puller: Adjust the three screws' height to find a perfect place for the Bridge Puller, then pull out the tabs directly. Use Slide Hammer repairer: Align the T-shaped repairer and press the drawing tabs with hot melt glue, pull the sliding rod backwards to pull up the dent. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
Use the plastic shovel to remove the glue stuck on the machine body. And then clean the repaired place with a clean wet cloth. We recommend having rubbing alcohol on hand as well to use to remove the glue that sticks to the vehichle. 21pc Paintless Dent Removal Rods (5A+10B+6C).
1pc Metal Tap down with 9 heads. 1pc Bridge Puller with 7 Pulling Tabs. We are not responsible for undeliverable addresses. Your recent orders will show up, and you will be able to see tracking numbers for those orders.
If you didn't got your package in time. I will try my best to help you. All of our products are 100% brand new unless otherwise stated in the description above.Most aftermarket items do not come with instructions and professional installation for all items is highly recommended. We Tuning will try our best to post more general installation guides or FAQ on our blog.
All products require professional installation. Most aftermarket products do not come with installation instructions because we would like you to have the item professionally installed to avoid any accidents that might occur during installation. We will reply to you quickly and try our best to serve you. This item is in the category "eBay Motors\Automotive Tools & Supplies\Automotive Repair Kits\Dent Repair Kits & Tools".The seller is "green-shop8" and is located in this country: US. This item can be shipped to United States.